Plastic flooring has been widely used in recent years. Many families have started to use it in home decoration, so now many owners are very interested in the construction process of plastic flooring. In fact, if you choose plastic floor decoration, you should not only know the installation method, but also know what the plastic floor construction precautions are, so that you can successfully install the plastic floor. Now let's follow Xiao Bian to understand.

1、 Construction method sequence of indoor plastic floor: surface treatment of base course → setting out → pre paving → uniform glue coating → plastic floor paving → rolling → curing.

2、 Key points of construction:

1. The base course shall be free from sand, peeling, ash, hollowing and oil stains. No roughness when touching. If the requirements are not met, the ground shall be treated first. Pop up mutually perpendicular positioning lines and pre lay them according to the pattern of mosaic. Weighing and compounding: when two-component adhesive is used, it shall be accurately weighed according to the proportion of components, and prepared in advance for use.

2. The base course and the back of the plastic floor plate shall be coated with glue at the same time. When the glue surface is not sticky, it can be paved. After the adhesive is scraped, it is exposed to the air at room temperature to volatilize part of the solvent. When the surface of the adhesive layer is not sticky by hand, the plastic floor can be pasted

3. After each block is pasted, the residual glue extruded shall be cleaned with cotton wool in time. After paving, the floor surface should be cleaned in time. When using water-based adhesive, wet cloth can be used to clean it. When using solvent based adhesive, turpentine or gasoline should be used to erase the adhesive marks.